Your Trusted Yukon, OK PolyLevel Concrete Lifting & Foundation Repair Contractor

Problem:
A homeowner in Yukon, OK, had uneven sidewalks and a sinking front porch slab that had become a tripping hazard for guests and delivery drivers. After years of minor settling, the concrete had dropped over two inches in some areas, affecting the curb appeal and safety of the home.

Solution:
We recommended our PolyLevel® concrete lifting system to restore the slabs quickly and non-invasively:
✅ PolyLevel® Injection – High-density polyurethane foam injected beneath the slabs to lift and level them precisely.
✅ NexusPro® Joint Sealant – Sealed cracks and joints to prevent future water infiltration.

Installation Process:
✔️ Step 1: Drilled small injection ports in the affected concrete
✔️ Step 2: Injected PolyLevel® foam to raise and stabilize slabs
✔️ Step 3: Applied NexusPro® to seal cracks and control joints
✔️ Step 4: Cleaned up and confirmed walkability within minutes

Results:
✔️ Sidewalk and porch safely leveled
✔️ No more trip hazards or standing water
✔️ Improved curb appeal and peace of mind
✔️ Fast, minimally invasive solution completed in hours

🔹 Curious how quickly we can lift sunken concrete? Visit our Before & After Gallery to see incredible PolyLevel® results.

Problem:

A homeowner in Yukon, OK reached out to Vesta Foundation Solutions not because of major structural concerns—but simply because he wanted a cleaner, more polished look around his home. He had previously dealt with some minor settling and had PolyLevel® and NexusPro® installed on part of his property. After seeing the transformation, he loved the results and decided to have even more NexusPro applied to enhance the overall appearance.

Solution:

To give the homeowner the clean, finished look he wanted, our team provided:
✅ PolyLevel® foam injection to correct minor settling and lift uneven slabs.
✅ NexusPro® joint and crack sealant to seal gaps and protect the concrete from water intrusion.
✅ Extended NexusPro coverage across more areas of the property for a uniform, professional finish.

Installation Process:

After the initial installation, the homeowner was so pleased with how smooth and neat the sealed joints looked that he called us back to apply NexusPro to additional concrete surfaces. Our crew returned and carefully cleaned and sealed the remaining joints and cracks, ensuring the concrete was protected and aesthetically consistent throughout.

Results:

✔️ Concrete slabs lifted and stabilized with PolyLevel®.
✔️ All joints and cracks sealed with clean, professional-grade NexusPro®.
✔️ Enhanced curb appeal and long-term concrete protection.
✔️ Homeowner thrilled with the visual upgrade and long-lasting durability.

At Vesta Foundation Solutions, we don’t just fix concrete—we make it look better, last longer, and give homeowners pride in their property.

Problem:

In Yukon, OK (73099), a homeowner contacted Vesta Foundation Solutions after noticing that several sections of their driveway had begun to sink. The uneven concrete created a noticeable dip where the slabs met, causing water to pool after rain and creating a significant trip hazard. The sinking was getting progressively worse, and they were worried about long-term damage—not to mention curb appeal.

During our inspection, we found:

• Up to 2 inches of settlement across multiple driveway slabs

• Erosion beneath the concrete, likely from poor drainage and Oklahoma’s shifting soils

• Open joints and cracks, allowing further water penetration

• Trip hazards that could pose a liability

The homeowner wanted a fast, clean solution that didn’t involve replacing the entire driveway.

Solution:

We recommended using PolyLevel® foam injection to lift and level the sinking slabs, followed by NexusPro® joint and crack sealant to protect the concrete from future erosion.

• PolyLevel® foam is a high-density polyurethane injected beneath the slab to gently raise it

• NexusPro® sealant is UV-resistant, flexible, and long-lasting, ideal for driveway expansion joints and surface cracks

This minimally invasive method would not only correct the elevation but also help prevent further settlement.

Installation Process:

Our crew began by drilling small, strategically placed injection ports in the affected slabs. Using precision tools, we injected PolyLevel foam underneath the concrete, which expanded and lifted the driveway back into place. We monitored elevation changes throughout the process to ensure even lift.

Once the slabs were level, we sealed all joints and visible cracks using NexusPro sealant, creating a watertight barrier to reduce the risk of future erosion. The entire project was completed in less than a day, and the homeowner was able to use their driveway again within hours.

Results:

• Driveway leveled and stabilized using PolyLevel

• Cracks and joints sealed with durable NexusPro

• Trip hazards eliminated and water no longer pooled

• Homeowner impressed with the fast, non-invasive process

This project not only restored the appearance of the driveway but also extended its life and functionality—without the need for costly replacement.

See more concrete transformations on our Before & After page.
Check it out here.

Problem:
A homeowner in Yukon, OK (73099) contacted us after noticing large cracks forming along the corners of their attached garage. The floor had begun to slope, and the brick exterior was showing signs of separation. A previous contractor suggested repouring the slab, but the homeowner wanted a permanent fix — not just a cosmetic one.

Solution:
Our inspection revealed classic signs of foundation settlement. We recommended:

• Push Pier installation along the garage foundation to reach stable load-bearing strata.

• Hydraulic lift to restore the foundation to a level position.

• Crack monitoring and cosmetic mortar repair after stabilization.

Installation Process:
We installed heavy-duty steel piers beneath the foundation footing, driving them hydraulically until reaching bedrock or competent soil. Once all piers were in place, we began a careful lift to realign the foundation. Once the structure was stable, our team completed minor mortar repair to blend in the cracked brickwork.

The homeowner was impressed by how precise and non-invasive the work was. The garage is now stable and level, and the repairs came with a lifetime transferable warranty for peace of mind.

Results:

• Structural foundation stabilized with deep push piers.

• Lift successfully closed major cracks and realigned the garage.

• Cosmetic restoration of brickwork.

• Trusted, permanent solution from a local expert.

Want to see the difference this made? Head over to our Before & After page for images of this garage foundation repair and many more.

Problem:

A homeowner in Yukon, OK (73099) noticed a concerning crack in the brick near the garage that had widened into a noticeable gap. Recognizing the potential danger of a sinking foundation and further structural damage, he reached out to Vesta Foundation Solutions for a thorough inspection and expert advice.

Solution:

After evaluating the situation, our team determined that the foundation was beginning to settle, compromising the structural integrity of the area. To address this, we recommended:
✅ Installation of 2 high-strength Push Piers to lift and support the sinking foundation.
✅ A strategic stabilization plan to restore the structure and close the gap near the garage.

Installation Process:

Our experienced crew arrived promptly and conducted a detailed inspection around the affected area. We then excavated around the impacted section and installed the two Push Piers in strategic locations. These piers were carefully driven into stable, load-bearing soil to provide the necessary lift and support. With the installation complete, the foundation was effectively raised and stabilized, reducing the gap in the brickwork and restoring structural integrity.

Results:

✔️ Foundation stabilized and structurally sound.
✔️ The gap in the brick near the garage was significantly reduced.
✔️ Sinking issues addressed, ensuring long-term stability.
✔️ Homeowner comfort and safety restored through expert intervention.

At Vesta Foundation Solutions, we deliver precise, long-lasting repairs that safeguard your home and provide peace of mind.

📸 Check out the before-and-after photos below!

🔹 Noticing foundation issues or cracks in your home? Contact us today for a free inspection!

Problem:

Homeowners in Yukon, OK (73099), were experiencing water intrusion in their sunroom, and after an inspection, it became clear that the issue was caused by:
✅ Street creep—the gradual shifting of their driveway, which was pushing against the foundation.
✅ Unsealed concrete joints in their walkway, allowing water to seep through.

If left unaddressed, these issues could lead to further foundation stress and ongoing water damage inside their home.

Solution:

To prevent further damage and provide a long-term fix, our team installed:
✔️ A 4” Compression Guard in the driveway to absorb expansion and contraction, preventing pressure on the foundation.
✔️ NexusPro® Joint Sealant in the walkway to seal gaps and prevent water from seeping into the sunroom.

This solution effectively relieved pressure from the foundation while also eliminating pathways for water intrusion.

Installation Process:

In mid-January 2025, our production team completed the installation by:
🔹 Cutting and placing the Compression Guard in the driveway to create a flexible buffer zone.
🔹 Applying NexusPro®, a durable and weather-resistant sealant, to the walkway joints for a long-lasting moisture barrier.
🔹 Ensuring all materials were properly set for maximum performance.

Results:

✔️ Water intrusion into the sunroom was effectively stopped.
✔️ The foundation was protected from further stress caused by street creep.
✔️ The homeowners were thrilled with the results and assured us they would contact Vesta for any future concrete repair needs.

At Vesta Foundation Solutions, we provide expert solutions to protect homes from the long-term effects of concrete movement and water damage.

🔹 Experiencing water intrusion or foundation pressure? Contact us today for a free inspection!

Problem:

Homeowners in Yukon, OK (73099), were experiencing water intrusion in their sunroom, and after an inspection, it became clear that the issue was caused by:
✅ Street creep—the gradual shifting of their driveway, which was pushing against the foundation.
✅ Unsealed concrete joints in their walkway, allowing water to seep through.

If left unaddressed, these issues could lead to further foundation stress and ongoing water damage inside their home.

Solution:

To prevent further damage and provide a long-term fix, our team installed:
✔️ A 4” Compression Guard in the driveway to absorb expansion and contraction, preventing pressure on the foundation.
✔️ NexusPro® Joint Sealant in the walkway to seal gaps and prevent water from seeping into the sunroom.

This solution effectively relieved pressure from the foundation while also eliminating pathways for water intrusion.

Installation Process:

In mid-January 2025, our production team completed the installation by:
🔹 Cutting and placing the Compression Guard in the driveway to create a flexible buffer zone.
🔹 Applying NexusPro®, a durable and weather-resistant sealant, to the walkway joints for a long-lasting moisture barrier.
🔹 Ensuring all materials were properly set for maximum performance.

Results:

✔️ Water intrusion into the sunroom was effectively stopped.
✔️ The foundation was protected from further stress caused by street creep.
✔️ The homeowners were thrilled with the results and assured us they would contact Vesta for any future concrete repair needs.

At Vesta Foundation Solutions, we provide expert solutions to protect homes from the long-term effects of concrete movement and water damage.

🔹 Experiencing water intrusion or foundation pressure? Contact us today for a free inspection!