Repairing foundations and lifting concrete in Oklahoma City, Norman, Yukon and nearby
Adam grew up in the mountains of North Carolina, helping his father's home construction company. This experience has helped propel Adam into the world of foundation repair and has given him priceless experience that Vesta customers appreciate and value. He has helped thousands of customers directly as well as trained and coached countless co-workers throughout the Foundation Supportworks Network of contractors. Adam brings a true customer focused process to foundation repair, concrete lifting, and crawl space repair. While this industry is normally not glamorous or easy, Adam takes pride in taking care of customer's greatest asset, their homes. He begins jobs as a Production Manager, but finishes them as friends.
The interior slab in this Tulsa, OK home was causing unalignment between the ceiling and cabinet fixtures. Vesta Foundation was able to use our PolyLevel Foam injection to level and even the slab.
When customers in Tulsa call us to discuss problems with their pier and beam structure, they often complain about musty smells, poor indoor air quality, and cold floors. That is exactly the problem with most homes in Oklahoma that have foundation vents. This is a common problem that can be repaired with the CleanSpace Crawl space encapsulation system. This is a simple system that encloses your crawl space and creates a dry usable space. The vapor barrier is installed on the dirt floor and up the walls. All joints are taped and the air space conditioned to make sure no mold can grow.
The Vesta Foundation Solutions team helped this homeowner get their home ready to sell by fixing these unsightly trip hazards.
Sometimes when you see a settled driveway you think the best way to repair it may be to jackhammer the sections out and start over. This thinking is common before customers find out about our PolyLevel system. This foam injection lift system does a great job to lift and level concrete back to original position.
Vesta team repaired a bowing and cracked foundation wall using the patented Powerbrace system.
The Vesta team was able to lift this slab up over an inch, back to level with the brick around the pool. Eliminating any tripping hazards, and bringing piece of mind back to the homeowner just in time for warm weather.
A large slab in Edmond, OK had settled and was able to be lifted to remedy a trip hazard.
The fall season is upon us and many homeowners are going to be getting ready to finish enjoying their summer and getting the pool ready for winterizing. The Vesta Foundation Solutions team can help get the pool deck repaired before you stretch the cover over the coping. This homeowner has a 1 inch drop in their concrete that the PolyLevel solution was able to repair.
The Vesta Team repaired another pool in the need of a family ready to jump ALL in during the 100-degree heat this summer. If you have ever been out at your pool only to find the edges are lifting or sinking due to poor backfill; VESTA can repair this using their PolyLevel System.
Another Sidewalk repaired in Oklahoma. This Joint sealer installed throughout the edge of the concrete after being lifted will ensure the slab does not creep away from the foundation due to debris and water getting against the foundations stem wall.
This driveway like many in our area has experienced settlement because of roof runoff and poorly compacted fill. By installing Nexus Pro Joint sealer and PolyLevel foam injection we were able to repair this home in a matter of hours compared to the long method of concrete replacement.
Commonly the slab portions of your porch have brick walls installed on top of the concrete. These can be lifted using POLY level foam injection and permanently support your porch and roof.
Here is a great example of a repaired garage by our Production Leader Adam Blake. The PolyLevel Solution is a proven method for fixing your sinking concrete.
The Vesta team is flexing their muscles here by showing how foundation repair costs can be kept low by installing a reliable and sensible system called POLY Level. This home had sinking in their home upwards of two inches! This approach is the same approach used on sidewalks and other concrete surfaces.
We were able to help this customer by completely sealing their crawl space. This helped control moisture therefore preventing future wood rot or mold issues.
The Vesta team was able to repair this driveway in about three hours saving the customer thousands of dollars when compared to jackhammering up the driveway and pouring new flatwork.
This porch had settled over the course of several years. This homeowner was ready to sell their home but a home inspector noticed the sinking slab and recognized it as a tripping hazard. The Vesta Foundation solutions came in on a Saturday just in time for closing and was able to get everything back in order.
In many cases, an elevated pool has soil pressures that push the walls out and away from the home. This movement causes cracks to form and the walls to tip over. Vesta will install a deadman system anchor in many cases but the pool can create a problem with these designs. In this case, the Vesta team installed steel bracing that is welded in place. These designs are engineered to support the weight of the pool and walls. By installing this the walls are permanently stabilized and holding the weight of the pool and all the family members over enjoying a Sunday barbecue.
The Vesta team helped repair this sinking pool deck in about 4 hours. Now the customer can enjoy peace of mind knowing their sinking concrete is repaired and protected.
Adam fixed another home in Yukon last week! He used our PolyLevel Injection System on a pool deck. The Drapers had been experiencing settlement in their pool deck since it had been built. Before it got worse and needed to be replaced, they had us repair it in about 3 hours using PolyLevel.
The Slab Lifting team was able to raise a kitchen slab floor.