Installation of Piers
Piers installed at a depth of 16 ft and reached pressures over 3000lbs psi
Galvenized piers installed to load bearing strata
The piers are driven in 3 ft sections down to load bearing strata
Pressure monitored by pressure gauges
Each pier is documented online by pressures shown on the electric pump. This prevents bending of piers and over lifting the home
The footers are excavated and notched for proper support of the foundation prior to lift
Drivestand and chassis for proper installation
In order to install piers properly, the hardware is designed to directly drive the pier using axial loads. This way the hardware does not slip on the shaft giving false load readings during installation.
After the installation, all foundations are marked clearly for future identification. The customer receives a copy of the pier logs and pressure readings. All systems have a nationally backed warranty.
Push Pier Installations in Edmond, OK
Pictures of residential projects for a customer in North Edmond. This homeowner originally from Harrah experienced settling issues after purchasing this home in Edmond. The Vesta team was onsite to help make sure the home was back on solid ground!