Blog

Options for repair for resurfacing concrete

Thursday, April 11th, 2019 by Ashley Armandariz


With spring around the corner many customers have been asking about ways to add curb appeal or
spruce up their home. Decorating Patio’s and installing pergolas have become some great ways to make
your back yard a hideaway during the summer months. If resurfacing your concrete something you are
considering, then there are several options that get you different results. From coatings, to stains,
resurfacing and overlays have been very common methods shared to us by customers.
The first methods of coating is typically an epoxy layer. They consist of a deep scrubbing of the surface,
pressure washing. Then the surface is applied with a primer and two part epoxy. These can be mixed
and tinted with various colors and as the material is poured onto your surface, a highlight such as oyster
shell is sprinkled in the finish. While these are great ways to provide a custom finish, quality can vary
and it only seals to the surface of your concrete.
Another method is to stain the concrete. Many stains actually penetrate into the surface of the
concrete. This allows the finish to provide some strengthening qualities to the concrete and preserve it
for years to come. Over time, the top layer if applied to thick can begin peeling and cracking. Ongoing
sealing or coatings may be needed every 3-5 years depending on the manufacturer.
The last method would be to install an overpour or Resurfacing system. An overpour is installed by
pouring a 1/2-1” thick layer of concrete on top of the existing surface. With Oklahoma’s weather
patterns we suggest against this because the lifetime is limited by its ability to bond the layers. Even
with bonding agents these layers have a tendency to crack and chip with the changing seasons. That’s
why resurfacing with an appropriate material such as Resurface Pro is important to recreating and
preserving the concrete.

Stained and pitted concrete surface

Resurface pro starts with an extensive cleaning. Power washers are used to prepare the concrete for
installation. Any cracks are sealed and voids filled using poly level structural foam. The Resurface Pro
Cementous mix is applied using a specialty sprayer. Once dry the surface is textured and sealed with a
stabilizing penetrant.
Once complete the resurfaced driveway, patio or sidewalk can then be sealed, stained or epoxied.
If you or anyone has any questions or would like to receive a free estimate contact us at
www.vestafoundationsolutions.com or 405-213-0492

our service area

We serve the following areas

Our Locations:

Vesta Foundation Solutions
4609 S Rockwell Ave Unit C
Oklahoma City, OK 73179
1-405-708-7370
Top
Service Area
Free Quote